Live Instrument Cable 3m / 5m
Couldn't load pickup availability
The IVU Creator Live Instrument Cable is a black 6.35 mm / 1/4-inch mono TS cable for compatible electric guitar, bass, pedal and amplifier connections. Choose a 3 m or 5 m length with two straight plugs (II) or one straight and one right-angle plug (IL).
What is the IVU Creator Live Instrument Cable?
The Live Instrument Cable is IVU Creator's stage-focused instrument lead for connecting compatible guitars and basses to amplification and signal-chain equipment. IVU Creator states that the cable uses an original OFC conductor with an extra-large conductor design, a flexible outer construction and electromagnetic noise rejection.
| Specification | Details |
|---|---|
| Cable type | Unbalanced mono instrument cable |
| Connector | 6.35 mm / 1/4-inch TS plugs |
| Lengths | 3 m (about 9.8 ft) or 5 m (about 16.4 ft) |
| Plug layouts | II = straight to straight; IL = straight to right-angle |
| Conductor | Original OFC type with an extra-large conductor design, according to IVU Creator |
| Stage handling | Extra-flexible construction, according to IVU Creator |
| Noise control | Electromagnetic noise rejection, according to IVU Creator; no numeric rejection rating is published |
| Cable color | Black |
Which 3 m or 5 m Live cable option should I choose?
Choose the shortest cable that reaches the equipment with enough slack to avoid pulling on either jack. The 3 m options suit compact practice, pedalboard and recording layouts, while the 5 m options provide more movement or distance for rehearsal and stage setups.
| Option | Length | Plug layout | Practical use |
|---|---|---|---|
| 3m II | 3 m / about 9.8 ft | Straight to straight | Compact setups where straight plugs fit both connection points |
| 3m IL | 3 m / about 9.8 ft | Straight to right-angle | Compact setups where one jack benefits from a lower-profile plug |
| 5m II | 5 m / about 16.4 ft | Straight to straight | Longer runs with straight-plug access at both ends |
| 5m IL | 5 m / about 16.4 ft | Straight to right-angle | Longer runs with a lower-profile connection at one end |
What does the OFC conductor claim mean?
OFC means oxygen-free copper, and IVU Creator identifies the Live cable's conductor as an original OFC type. The brand says the extra-large conductor and optimized crystalline structure are designed to preserve dynamics, detail, picking attack and guitar harmonics; these are manufacturer descriptions rather than independently published measurements.
Which instruments and equipment can use this cable?
The Live Instrument Cable can be used when both connection points accept a standard unbalanced 1/4-inch TS instrument signal. Check the output and input labels or equipment manuals before connecting, especially with keyboards, mixers, audio interfaces and other devices that may also use balanced TRS connections.
| Connection | What to check |
|---|---|
| Electric guitar or bass to amplifier | The instrument output and amplifier input accept 1/4-inch TS |
| Instrument to pedal or pedalboard | The signal path uses standard 1/4-inch TS instrument connections |
| Instrument to audio interface or recorder | The destination provides a compatible instrument or high-impedance input |
| Other instrument or audio equipment | Both ends support an unbalanced mono TS signal; do not assume every 1/4-inch jack is compatible |
How do I choose between II and IL plug layouts?
- Check the direction of the instrument output and the clearance around both connection points.
- Choose II when two straight plugs fit without pressure on the cable or jack.
- Choose IL when a right-angle plug gives better clearance at one end of the setup.
- Compare the product images with recessed, side-mounted or closely spaced jacks before ordering.
How should I connect and care for the Live Instrument Cable?
- Turn down the amplifier, mixer, interface or monitor level before making the connection.
- Insert one plug fully into the compatible instrument output.
- Insert the other plug into a compatible 1/4-inch TS input.
- Route the cable with enough slack and avoid tight bends, pinching and pulling at the plug.
- Raise the level gradually and confirm the signal before playing.
- Disconnect by holding the plug body, then coil the cable without sharp bends.
Frequently asked questions
Is the Live Instrument Cable balanced?
No. The product images show 1/4-inch TS plugs with one insulating ring, which indicates an unbalanced mono connection. Use a different cable when the equipment specifically requires balanced TRS wiring.
What do II and IL mean?
II means straight to straight, while IL means straight to right-angle. Both plug layouts are listed in 3 m and 5 m lengths.
Can I use this cable with pedals or an audio interface?
Yes, when the pedal or destination input accepts a standard 1/4-inch TS instrument signal. For an audio interface, use the input mode specified for an instrument or high-impedance source.
Does the product page publish capacitance, conductor gauge or shielding construction?
No. The current official product page does not publish capacitance, AWG, shielding construction or a numeric noise-rejection rating. The page identifies an OFC conductor, extra-large conductor design, flexibility and electromagnetic noise rejection.
Can this instrument cable connect an amplifier head to a passive speaker cabinet?
No. This listing is for an instrument cable, not a speaker cable. Use the cable type specified by the amplifier and speaker manufacturers for a powered amplifier-to-passive-speaker connection.
Order Pickup allows you to order items on Woodstock or in the Boostheme and pick them up for free at your local Woostock store. Order Pickup is listed on the item’s page, and usually ready within 2 hours* of placing your order. Items marked Ship to Store can be picked up within 4-7 days instead.
You can also shop for items eligible for Order Pickup on any search results page. Select the filter option and select buy online & pickup or Free Order Pickup.
Items with limited or no stock in store and items containing hazardous materials may not be eligible for Order Pickup.
To place an order using Order Pickup:
- Find an item and select color, size and quantity (if applicable).
- Select Pick it up or Ship to Store on the item’s page.
- Your set store will be the default store for pickup.
- Proceed to checkout and submit order.
- Wait until you receive a pickup notification before you go to the store to pick up your item.
- Visit Guest Services or the designated pickup location at your selected store to get your item(s).
To place an order using Order Pickup:
- Find an item and select color, size and quantity (if applicable).
- Select Pick it up or Ship to Store on the item’s page.
- Your set store will be the default store for pickup.
- Proceed to checkout and submit order.
- Wait until you receive a pickup notification before you go to the store to pick up your item.
- Visit Guest Services or the designated pickup location at your selected store to get your item(s).