Solderless Patch Cable Kit (POK-02)
Couldn't load pickup availability
The IVU Creator POK-02 is a solderless 6.35 mm / 1/4-inch mono patch-cable system for building custom-length audio connections between guitar pedals. Its dual-hole plugs can be configured as straight or right-angle connectors, helping route pedalboard cables where space is limited.
What is the POK-02 solderless patch cable kit?
POK-02 lets you cut pedalboard patch cable to the required length and secure each plug with a set screw—no soldering iron is required. IVU's product materials identify 10 dual-hole 6.35 mm mono plugs, 3 m of AWG23 low-capacitance cable and one screwdriver.
- Application: custom audio patch cables for compatible guitar pedals and pedalboards
- Plug type: dual-hole 6.35 mm / 1/4-inch mono plugs
- Plug quantity shown: 10 pieces
- Cable: AWG23 low-capacitance cable, 3 m
- Plug layouts: straight or right-angle
- Assembly tool shown: screwdriver, 1 piece
What are the verified POK-02 specifications?
The POK-02 product materials specify 10 dual-hole mono plugs and 3 m of AWG23 low-capacitance cable. The system is intended for pedalboard audio signal connections, not DC pedal-power wiring.
| Item | Verified detail |
|---|---|
| Model | POK-02 |
| Connector format | 6.35 mm / 1/4-inch mono plug |
| Plug design | Dual-hole; configurable as straight or right-angle |
| Plug quantity shown | 10 pieces |
| Cable | AWG23 low-capacitance cable |
| Cable length shown | 3 m / about 9.8 ft |
| Assembly | Cut cable, insert it into the plug and secure the set screw |
| Tool shown | 1 screwdriver |
How do straight and right-angle plugs help a pedalboard?
The dual-hole plug body lets the cable exit straight or at a right angle, so one plug design can adapt to different pedal-jack positions. IVU states that the mini plug design uses less space than standard audio plugs; actual clearance depends on the pedal enclosure and spacing.
| Configuration | When it may fit best | What to check |
|---|---|---|
| Straight | Open layouts with room behind or beside the jack | Cable path does not press against another pedal or enclosure |
| Right-angle | Tighter side-by-side layouts or side-mounted jacks | Plug body and cable bend clear adjacent controls and power plugs |
How do I build a solderless pedalboard patch cable?
- Arrange the pedals and measure the real cable path, leaving enough slack to avoid pulling on either jack.
- Cut the cable cleanly to the required length.
- Choose a straight or right-angle cable exit for each dual-hole plug.
- Insert the cable end fully into the plug and secure the set screw with the screwdriver.
- Check continuity or test the finished cable at low volume before completing the pedalboard wiring.
What should I check before ordering POK-02?
Confirm that the pedals use compatible 6.35 mm / 1/4-inch mono audio jacks and review the selected store option before checkout. The current Shopify export lists Plug X 10pcs and Cable X 3m as separate options, so verify that the selected option matches the components you need.
Frequently asked questions
Does POK-02 require soldering?
No. The cable is cut to length, inserted into the plug and secured with a set screw.
Can each plug be straight or right-angle?
Yes. The dual-hole design allows straight or right-angle cable routing from the same plug body.
How many two-ended patch cables can 10 plugs make?
Ten plugs can make up to five two-ended patch cables when all plugs are used in pairs. The final number and length depend on how the 3 m cable is cut.
Is POK-02 a DC pedal-power cable kit?
No. POK-02 is listed for 6.35 mm mono pedalboard audio patch cables. IVU identifies POK-03 as the separate solderless DC cable kit.
Does every current option include both plugs and cable?
The supplied Shopify export lists the 10-plug set and 3 m cable as separate options. Check the selected option and current package contents before ordering.
Order Pickup allows you to order items on Woodstock or in the Boostheme and pick them up for free at your local Woostock store. Order Pickup is listed on the item’s page, and usually ready within 2 hours* of placing your order. Items marked Ship to Store can be picked up within 4-7 days instead.
You can also shop for items eligible for Order Pickup on any search results page. Select the filter option and select buy online & pickup or Free Order Pickup.
Items with limited or no stock in store and items containing hazardous materials may not be eligible for Order Pickup.
To place an order using Order Pickup:
- Find an item and select color, size and quantity (if applicable).
- Select Pick it up or Ship to Store on the item’s page.
- Your set store will be the default store for pickup.
- Proceed to checkout and submit order.
- Wait until you receive a pickup notification before you go to the store to pick up your item.
- Visit Guest Services or the designated pickup location at your selected store to get your item(s).
To place an order using Order Pickup:
- Find an item and select color, size and quantity (if applicable).
- Select Pick it up or Ship to Store on the item’s page.
- Your set store will be the default store for pickup.
- Proceed to checkout and submit order.
- Wait until you receive a pickup notification before you go to the store to pick up your item.
- Visit Guest Services or the designated pickup location at your selected store to get your item(s).