The IVU Creator POK-01 Pedalboard Organizer Kit combines pedal mounting and cable routing in one set. It includes 1 m of 3M Dual Lock, 10 adhesive-backed cable tie mounts and 20 cable ties for arranging pedals and guiding cables around a pedalboard.
What is included in the POK-01 Pedalboard Organizer Kit?
POK-01 includes three organizer components: a 1 cm × 1 m roll of 3M Dual Lock, ten 2 × 2 cm cable tie mounts and twenty 20 cm cable ties. A pedalboard, effects pedals and instrument or power cables are not listed as included.
| Component | Quantity and size | Pedalboard use |
|---|---|---|
| 3M Dual Lock | 1 roll; 1 cm wide × 1 m long | Cut into matching sections to position pedals on the board |
| Cable tie mounts | 10 pieces; 2 × 2 cm each | Create anchor points along the planned cable route |
| Cable ties | 20 pieces; 20 cm long each | Guide and group compatible audio or power cables |
How does POK-01 organize a guitar pedalboard?
The Dual Lock sections hold pedal positions, while the mounts and cable ties guide loose leads along a planned path. This separates two common setup jobs—pedal placement and cable routing—so each part can be adjusted without adding unnecessary cable loops.
| Setup need | POK-01 component | What to check |
|---|---|---|
| Position a pedal | 3M Dual Lock | Confirm the pedal base and board surface can accept adhesive-backed fastener |
| Route cables | 2 × 2 cm cable tie mounts | Plan clearance around jacks, switches, battery doors and ventilation |
| Control loose cable | 20 cm cable ties | Leave strain-relief slack and avoid tight bends or pinching |
How do I install the POK-01 pedalboard organizer?
- Place all pedals on the board and test the signal and power-cable paths before applying any adhesive-backed part.
- Confirm that each contact surface is compatible, clean and dry, following the surface manufacturer's care instructions.
- Measure and cut matching Dual Lock sections for the pedal base and its planned board position.
- Position the cable tie mounts along the cable route without blocking pedal jacks, controls or service access.
- Feed cable ties through the mounts and secure the cables loosely enough to prevent strain, pinching and sharp bends.
- Reconnect the rig, test every pedal and trim excess tie length only after the final layout is confirmed.
What should I check before using adhesive-backed pedalboard organizers?
Check both fit and surface compatibility before installation. The supplied material does not specify load capacity, adhesive cure time, temperature resistance, residue-free removal or compatibility with every pedal finish and pedalboard surface. Do not cover labels, battery doors, ventilation openings or fasteners needed for servicing.
Frequently asked questions
Does POK-01 include a pedalboard or effects pedals?
No pedalboard or effects pedals are listed as included. The verified package contents are Dual Lock, cable tie mounts and cable ties.
Can the 1 m Dual Lock strip be cut for multiple pedals?
Yes. The 1 m roll can be measured and cut into sections for the pedal positions in your layout. Allow matching sections for both contact surfaces.
Can POK-01 route both audio and power cables?
The mounts and ties can guide compatible pedalboard cables, but they do not change a cable's electrical function. Keep suitable separation and strain relief for the specific signal and power layout.
Will POK-01 fit every pedal and pedalboard?
Universal compatibility is not promised. Check the available mounting area, surface finish, pedal feet, battery access, ventilation and cable-jack clearance before applying adhesive-backed parts.
Can the adhesive-backed parts be removed without marks?
Residue-free removal is not specified. Test an inconspicuous area or follow the equipment manufacturer's care guidance when surface finish matters.
Order Pickup allows you to order items on Woodstock or in the Boostheme and pick them up for free at your local Woostock store. Order Pickup is listed on the item’s page, and usually ready within 2 hours* of placing your order. Items marked Ship to Store can be picked up within 4-7 days instead.
You can also shop for items eligible for Order Pickup on any search results page. Select the filter option and select buy online & pickup or Free Order Pickup.
Items with limited or no stock in store and items containing hazardous materials may not be eligible for Order Pickup.
To place an order using Order Pickup:
- Find an item and select color, size and quantity (if applicable).
- Select Pick it up or Ship to Store on the item’s page.
- Your set store will be the default store for pickup.
- Proceed to checkout and submit order.
- Wait until you receive a pickup notification before you go to the store to pick up your item.
- Visit Guest Services or the designated pickup location at your selected store to get your item(s).
To place an order using Order Pickup:
- Find an item and select color, size and quantity (if applicable).
- Select Pick it up or Ship to Store on the item’s page.
- Your set store will be the default store for pickup.
- Proceed to checkout and submit order.
- Wait until you receive a pickup notification before you go to the store to pick up your item.
- Visit Guest Services or the designated pickup location at your selected store to get your item(s).